Lead: In international shipping, owners have long pursued economies of scale through "bigger and more capacity." Ultra-large container vessels (ULCVs) of over 23,000 TEU are the pinnacle of modern shipbuilding. Yet when these 400-meter "sea giants" enter ports with limited infrastructure or during congestion periods, they often run into an awkward reality: "A big ship can't turn around easily, and berthing becomes a headache."

Recently, MSC's star vessel MSC Gülsün staged a real-life "giant ship trapped" drama on a Middle East service.

Loaded in late August, still "waiting for a berth" in November?

A shipment originally scheduled to depart Shanghai's Yangshan Port in late August 2026 for Sohar, Oman, was loaded on MSC Gülsün, which has a capacity of 23,756 TEU. Normally, direct sailings from China to the Middle East take about 20 to 30 days. But this cargo took two and a half months, and even the carrier's official tracking system showed the subsequent estimated departure/arrival times (ETD/ETA) wiped clean.

What happened behind the scenes? Feedback from frontline freight forwarder groups revealed the answer: the ship was too large and could not secure a berth at Khor Fakkan in the UAE for a long time.

Hardware qualifies, so why "no berthing conditions"?

By rights, the Khor Fakkan Container Terminal (KCT) in the UAE is one of the Middle East's core hubs, with 6 berths, a total quay length of 1,880 meters and a water depth of 16 meters, and it has handled 24,000-TEU-class giants before. But in actual operations, the big ship's "physique" became the biggest constraint:

MSC MARIELLA. With a carrying capacity of 24,346 TEU, it is one of the world's largest container ships, berthing at Khor Fakkan Port.

  • One ship occupies two berths, making berth coordination difficult: MSC Gülsün is nearly 400 meters long, while the average berth at Khor Fakkan is only about 310 meters. That means the giant must span and occupy 1.5 to 2 standard berths when alongside. With the port already congested and many vessels queuing, the terminal finds it hard to set aside a full continuous stretch of quay just for one large ship, so it can only let the vessel wait at anchorage while smaller and medium-sized ships that departed later slip into available slots, discharge and sail away.
  • Draft bottleneck forces waiting for tide: When fully loaded, the giant's maximum draft can reach 16.5 meters, exceeding the port's normal depth limit, so it must precisely calculate the tidal range and wait for a high-tide window to enter port safely.

Surreal scene: cranes not long enough, giant ship must leave port to "turn around"

Even after finally securing a berth, the real test had just begun. Frontline operators reported that discharging the ship would take at least a week, because: "The cranes aren't long enough, and the ship has to turn around."

This is no joke but a real physical limitation. MSC Gülsün has a beam of 61.5 meters, with 24 rows of containers stacked side by side on deck. Some earlier quay crane models at the port have an outreach covering only 18 to 22 rows. As a result, the cranes can easily reach containers on the quay side but cannot reach the 23rd and 24th rows on the outermost (seaward) side.

To discharge containers in the blind zone, the terminal had to adopt an extremely time-consuming operation: after discharging one side, cast off the lines, call tugs to pull the 400-meter giant out of the berth, turn it 180 degrees in the harbor basin or open sea, then re-pilot and berth it so the formerly seaward side faces the quay for continued work. This whole process sharply reduces handling efficiency.

What the era of giant ships means for foreign trade and freight forwarders

As MSC Gülsün completes its long berthing and discharge at Khor Fakkan, subsequent cargo to Sohar and other nearby ports in Oman will most likely be relayed on the final leg by small feeder vessels.

As people joked in the forwarder groups: "MSC's schedules are a mystery — both very fast and very slow ones exist. A 24,000-TEU ship can take two and a half months, but some MSC small ships, with luck, can arrive in about a month." This sharp contrast is a reminder for foreign trade companies and freight forwarders:

  • Big ships are not necessarily fast; vessel type determines flexibility: Super-giants of over 20,000 TEU have lower per-container sea freight costs, but they are extremely picky about the hardware, water depth and scheduling capabilities of the ports they call at. Once regional port congestion hits, waiting and handling times for big ships often expand exponentially; medium and small vessels, by contrast, are more flexible in berth coordination and handling, and more likely to "slip into slots" and get ahead during congestion.
  • Watch transshipment nodes and service configuration closely: For cargo to regions with uneven infrastructure such as the Middle East, South America and West Africa, when booking space, look beyond departure times to the size of the vessel deployed, whether hub-port transshipment is involved and real-time congestion at the destination port. Do not blindly believe in "giant ship direct services"; prepare schedule contingency plans and communicate with customers in advance.

Discussion heats up

If the group is full, add the group owner on WeChat: bryce006

Note your company. You will be invited to join the group.

Compiled by the Huodai Tianyan platform

Please credit: Huodai Tianyan

🗺️ Experienced freight forwarders are using this global logistics map tool!

Simply enter an address or postcode on the Huodai Tianyan map, and nearby ports, airports, FBA warehouses and rail stations instantly appear, with distances clear at a glance.

No more waiting for overseas agents to reply — search directly from China and respond faster in negotiations. This is the true god's-eye view of logistics.

Huodai Tianyan AI: find freight forwarders, find shipowners, check port charges.